You want a number before anyone comes out to look at your garage. Fair enough. Below are the typical ranges we use across Greater Cincinnati and Northern Kentucky, what pushes a job toward either end, and how a basement or shop floor compares with a coated garage floor. Still deciding between paint, a DIY kit and an installed floor? Our garage floor coating buyer's guide covers that choice; this page is about the money.
Prefer to click rather than read? Floor Studio lets you choose a garage size, a finish and colors, then shows a typical range. It is a starting point, not a bid.
The slab usually decides more of the price than the coating does. That is why we price each floor only after seeing the concrete.
The short answer (typical, not a quote): a flake floor with a polyaspartic top coat runs about $5 to $10 per square foot, so a 2-car garage of roughly 400–500 sq ft comes to about $2,000 to $5,000. Solid-color epoxy sits lower (about $3 to $6 a foot) and metallic higher (about $6 to $12). Crack repair, badly worn concrete and a damp slab add to any of them.
Typical Prices by Coating System
| System | Typical per sq ft | 2-car garage (about 400–500 sq ft) | Where it fits |
|---|---|---|---|
| Solid-color epoxy | about $3 – $6 | about $1,200 – $3,000 | Basements, storage rooms, plain shop floors |
| Flake floor, polyaspartic top coat | about $5 – $10 | about $2,000 – $5,000 | The everyday garage; chips add texture and hide grit |
| Metallic epoxy | about $6 – $12 | about $2,400 – $6,000 | Rec rooms, home bars, showpiece garages |
Where the figures come from: published cost guides, not guesses. HomeGuide's 2026 epoxy guide puts installed epoxy at $4 to $10 per square foot and its polyaspartic guide at $5 to $12. Bob Vila lists metallic at $5 to $12, the CoatedLocal directory's Cincinnati page lists polyaspartic at $5 to $9, and HomeAdvisor's average epoxy job is $2,526. Our ranges sit where those overlap.
Pick a size, a finish and colors. Floor Studio shows the typical range, and we can take it from there.
Open Floor Studio →1-, 2- and 3-Car Garages
Typical totals for a flake floor with a polyaspartic top coat:
- 1-car garage (about 200–300 sq ft): about $1,000 – $3,000
- 2-car garage (about 400–500 sq ft): about $2,000 – $5,000
- 3-car garage (about 600–800 sq ft): about $3,000 – $8,000
Measure before you compare. Two garages sold as “2-car” can differ by a hundred square feet, and at $5 to $10 a foot that gap alone is worth $500 to $1,000. As a cross-check, HomeGuide's garage-coating guide gives $1,600 to $4,800 for a 400 sq ft two-car garage; HomeAdvisor, assuming 500 sq ft, gives $1,500 to $6,000.
Want a Price for Your Floor?
The quote is free. We come out, measure, look at the concrete and price the system you have in mind.
What Moves the Price Around Here
Same-size garages can land at opposite ends of the range. The usual reasons:
1. The age of the slab
Greater Cincinnati is really two housing markets. In the city the median home was built in 1952, and about four in ten predate 1940, according to the Census Bureau's American Community Survey. Newport's median is 1947 and Fort Thomas's 1955. Concrete that old tends to carry pits, patches and stains that get ground and filled first. Where the surface is badly damaged, HomeGuide puts resurfacing at about $3 to $7 per square foot.
The growth ring is different. Mason's median home dates from 1996. Look county-wide and Warren County, Ohio and Boone County, KY each come in at 1997. A slab that age more often needs protecting than rescuing.
2. Cracks, and whether they are still moving
Hairline cracks are filled as part of prep. Where a crack needs a proper patch, HomeAdvisor and Bob Vila both list patching at roughly $25 to $250. Hillside lots add a question. Many local slopes carry clay-rich soil over Kope Formation shale, and the Ohio and Kentucky geological surveys note that some local soils swell and shrink between wet and dry spells. A crack that is still moving will show through any coating, so we check cracks for movement and tell you what we find before anything is coated.
3. Moisture in the concrete
This matters most below grade. Basement slabs can carry ground moisture, and a coating laid over a damp slab can let go, so we check the slab before recommending a system. HomeGuide puts moisture and hardness testing at about $50 to $300, and a moisture-mitigation primer typically adds about $1 to $3 per square foot where readings call for one.
4. Salt damage by the garage door
Ohio's residential code groups garage slabs with porches and outdoor steps: concrete exposed to weather and de-icers. The City of Cincinnati spreads salt or brine ahead of storms, hills and bridges first, and the slush comes home on your tires. If the concrete inside the door has started to flake (engineers call it scaling), those patches get ground out and repaired before coating, which adds time and material.
Basement Floors vs. Garage Floors
Basements are a big part of the work here (see basement epoxy flooring); eight reviews on our Google profile are tagged “basement floor”. Ohio's code treats a basement slab as lighter-duty interior concrete (2,500 psi) and a garage slab as weather-exposed (3,500 psi, air-entrained).
A garage floor faces salt, hot tires and water running off the car, which is why the garage prices above assume flake with a polyaspartic top coat. A basement never sees road salt, so solid color or metallic often makes sense, while moisture gets more attention. Rough arithmetic for a 600 sq ft basement: about $1,800 to $3,600 in solid-color epoxy or $3,600 to $7,200 in metallic, plus a test or primer if the slab needs it.
One honest limit: no coating keeps water out of a basement. The Ohio River crested near 61 feet in April 2025, and July 2026 storms brought more than 1,500 reports of sewer backups. A coated floor won't stop that, but it is far easier to mop and disinfect afterwards. Never coat a slab that is actively wet.
“Nick was prompt and very responsive. Our epoxy floor in our basement laundry room was done in a reasonable amount of time and it’s beautiful! They even ground down imperfections and sealed cracks. We definitely recommend!!”
— Krystal & Til, Google review
Commercial and Shop Floors
We have not found published commercial prices specific to Greater Cincinnati, so these outside figures are for order of magnitude only. One contractor's 2026 guide for the Southeast lists two-coat epoxy at $3 to $5 per square foot, high-build 100%-solids epoxy at $5 to $8, and polyaspartic and polyurea at $5 to $12. HomeAdvisor's national guide puts commercial 100%-solids systems at $12 or more. The same Southeast guide prices urethane mortar, the usual choice for hot wash-down areas in kitchens and breweries, at $8 to $15; we do not install that system, and we will point out any part of your floor that needs it. We price each commercial floor after walking it.
What Our Quote Covers
- A visit, not a phone guess. We measure the space and look at the concrete. The quote is free.
- Your options. Solid, flake or metallic; epoxy, polyaspartic or polyurea; custom-mixed color, a flake, mica or glitter blend, and a non-slip additive.
- Prep first. The concrete is ground smooth, and cracks, holes and divots are filled before the first coat.
- Photos and cleanup. Before, during and after pictures, and the crew cleans up when the floor is done.
- Cure times. Ask us when you can walk on the floor and when you can park on it; it depends on the product.
Whoever you hire, compare quotes line by line: slab prep, crack repair, a moisture check for basements, the top coat, the time before you can drive on it and the warranty terms in writing. A low number that skips prep is not a bargain, and a big discount only matters once you can see the full price behind it. Call (513) 434-8103 or request a free quote online, then weigh it against any other epoxy flooring company in Cincinnati.
Frequently Asked Questions
How much does an epoxy garage floor cost in Cincinnati?
A typical 2-car garage costs about $2,000 to $5,000 for a flake floor with a polyaspartic top coat. A 1-car garage usually lands around $1,000 to $3,000 and a 3-car around $3,000 to $8,000. Those are typical ranges, not quotes; we price each floor after seeing the slab.
Does a basement floor cost more than a garage floor?
It depends on the finish and the slab more than the room. Solid-color epoxy typically runs about $3 to $6 per square foot and metallic about $6 to $12, and a damp basement slab may need a moisture test or a primer first.
Is the quote free?
Yes. We come out, measure, look at the concrete and price the system you want at no charge. Call (513) 434-8103, Monday to Friday between 9 AM and 6 PM, or request a quote online.
Do the same prices apply in Northern Kentucky?
Yes. We use one set of typical ranges on both sides of the river, Florence, Erlanger, Newport and Fort Thomas included, and Kentucky floors are quoted the same way, in person.
