Epoxy Flooring in Sharonville, OH: Floors for 1960s–80s Garages

About seven in ten Sharonville homes went up between 1960 and 1999, so most slabs here have plenty of winters behind them. We grind them smooth, fill the cracks and finish them in flake, metallic or solid-color epoxy.

5.0 on Google · 59 Reviews
2-Car Typical: $2K–$5K
Cracks Filled Before Coating
Quoted in Person

Floors for Sharonville’s Older Slabs

Sharonville boomed in the 1960s, growing from 3,890 residents in 1960 to 11,393 by 1970, and that decade still accounts for more of today’s homes than any other. The median home was built around 1974. So many garage slabs in town, from the streets near Sharon Woods to the blocks off Reading Road, are fifty years old or more. With the right prep, slabs that age can still be coated: a garage floor coating, a basement or laundry-room floor, or a commercial floor for a kitchen or back room.

We set the price after walking the floor and looking at its cracks, oil stains and any old paint. If a crack is still moving, you hear about it before anything is coated; a coating won’t hold a shifting slab together.

About 94% of Sharonville’s land is in Hamilton County, Ohio, and the rest is in Butler County, Ohio; we cover both parts. Sharonville addresses use ZIP 45241 around Sharon Woods and 45246 near the convention center. For a ballpark first, see the Cincinnati epoxy cost guide or try colors in the Floor Studio. The garage floor coating guide explains the systems.

Next door, Springdale, Ohio is on the list too. It is also in Hamilton County, it shares the 45246 ZIP code with part of Sharonville, and its homes are much the same age: about two-thirds were built between 1960 and 1989, and the median home dates to 1971. So a Springdale garage slab usually needs the same grinding and crack repair before any coating goes down.

Get a Free Sharonville Quote
A 1960s town at heartMore than one Sharonville home in five dates from the 1960s. Slabs that age often need grinding, crack filling or resurfacing before color goes on.
Brine and salt on the drive homeODOT and county road crews put down brine and salt each winter. What your tires collect on I-75 or I-275 melts off at the garage door.
About 100 freezing nightsThe region’s official weather station, at CVG, averages about 100 nights a year at or below 32°F. Most thaw by afternoon, so bare concrete wets and refreezes.
A hotel and restaurant stripChester Road’s Northern Lights District holds the convention center, about 20 hotels and dozens of restaurants: plenty of kitchen and back-of-house floor.
Floor plan, calculator, tape measure and flake color chips for planning an epoxy floor in Sharonville, OH

Flake, metallic or solid color: we go through the options with you at the free Sharonville visit.

Why Call Us for a Sharonville Floor

Published prices, careful prep and one crew from the first visit to the clean-up.

In Person

Quoted by the Installer

We measure and price the floor after seeing it. Whoever quotes your floor installs it.

5.0

59 Reviews on Google

Customers mention being fit in fast, cracks ground down and sealed, reasonable prices and a tidy clean-up.

1960s

Sixty-Year-Old Slabs Welcome

More Sharonville homes date from the 1960s than from any other decade. A slab that old can usually still take a coating once it is ground and patched, and if yours can’t, we tell you at the visit.

Prep

Smooth Concrete, Filled Cracks

The slab is ground smooth and its cracks, holes and divots filled before any coat. On a sixty-year-old garage, that matters more than color.

$2K–$5K

Typical Prices, Published

Typical ranges are on this page and in the cost guide, and the Floor Studio previews a finish before anyone visits.

See full pricing guide →

1 Crew

Garage, Basement or Business

One crew does garages, basement laundry rooms and commercial kitchens.

How a Sharonville Floor Gets Done

Five steps, starting with a visit that costs you nothing. Our installation page goes step by step.

1

We Come Out

Free

We measure the space, check the slab for cracks, stains and old coatings, and talk through colors and systems. The price comes after we have seen the floor. Book a visit.

In-home consultation and slab moisture assessment
The free visit: measuring up and talking finishes.
2

Grinding the Slab Smooth

Prep

The surface is ground and sanded smooth so the first coat bonds to clean concrete, not dirt or old paint. In basements we also check for moisture before recommending a system.

Diamond grinding concrete to prepare for epoxy coating
Grinding gives the first coat something to grip.
3

Cracks, Holes and Divots Filled

Repair

Cracks, holes and divots are filled so the finished floor reads flat. A crack that is still moving is a different problem, and we say so before coating.

Crack and joint repair on a concrete slab
Cracks and divots filled flush before the first coat.
4

Color, Texture, Top Coat

Coats

Your color is mixed to order and laid in sections. Flake, mica or glitter adds texture, a non-slip additive is available for grip, and a top coat goes over the color. Polyaspartic and polyurea are available too.

Applying epoxy coating in controlled conditions
Base color going down, one section at a time.
5

Photos, Clean-Up, Cure Times

Finish

You get before, during and after photos, and the crew clears the debris. Walk-on and drive-on times depend on the system, so ask us for yours.

Completed epoxy floor — seamless and high-gloss
A finished floor: one seamless, glossy surface.

Step 1 Costs Nothing and Happens at Your Home

The quote comes on site, after we have seen the floor.

Get a Free Quote (513) 434-8103

Finishes and Colors for Sharonville Floors

Colors are mixed for each floor. These are the looks and coatings we offer; chip blends and metallic pigments are in the color catalog.

Two-car garage render with ocean-pearl metallic epoxy, Sharonville, OH

Metallic Epoxy

Swirled color that looks like liquid metal, in shades such as blue, red, silver and bronze. No two pours match. The metallic floor guide covers the options.

Two-car garage render with domino flake epoxy, Sharonville, OH

Flake

Pick a base color, chip blend and chip size. The speckle hides dust and small marks better than one flat color.

Two-car garage render with slate-gray solid-color epoxy, Sharonville, OH

Solid Color

One color of 100% solids epoxy: plain, bright and practical for basements, storage rooms and back-of-house floors.

Two-car garage render with tuxedo flake under a polyaspartic top coat, Sharonville, OH

Polyaspartic & Polyurea

Offered alongside epoxy. Polyaspartic is often the top coat over flake; we help you pick the system for a salted garage, a basement or a kitchen.

Two-car garage render with a speckled granite-look finish, Sharonville, OH

Mica, Glitter & Non-Slip

Mica or glitter blended in for sparkle, and a gritty non-slip additive for entries, steps and floors that get wet.

Not sure which finish suits a Sharonville garage?

Coating a sixty-year-old garage slab? Compare flake, metallic and solid color in the Floor Studio, then have us check the concrete and its cracks at the free visit.

Get a Free Quote Open the Floor Studio →

What Our Customers Say

Three jobs, in the customers’ own words. More are on our reviews page.

5.0 on Google · 59 Reviews
"They did an amazing job. They were very thorough, took their time, and cleaned up after themselves very nicely. Finished product is amazing. My friends are going to create a TikTok of our bar/floor. I would give them 10 Stars if I could. Highly recommend 👍"
Sarah T
Google review
Bar floor
"Nick was great to work with for our garage floor remodel. Was able to squeeze us in last minute. Floors are a huge upgrade and look amazing. Highly recommend!"
Andrew Laurence
Google review
Garage
"Nick and Bryant did a fantastic job on our garage floor. Nick sat down with me and laid out the plan with the colors to achieve the look that we wanted. He then described the process and timeline necessary to complete the work. He sent pics throughout the process to keep me informed. The metallic epoxy turned out great! Almost looks like a natural matte finished marbled look."
John Vu
Google review
Metallic
Get a Free Quote Read All Reviews on Google (opens in a new tab)

Sharonville Epoxy Flooring Questions

Short answers first.

Yes. Epoxy Flooring Cincinnati puts down garage, basement and commercial floors across Sharonville, Ohio, including the part of the city that lies in Butler County, Ohio. Call (513) 434-8103, Monday to Friday, 9 AM to 6 PM, to set up a free visit.

Typically about $2,000 to $5,000 for a flake floor with a polyaspartic top coat, a typical range and not a quote. That is about $5 to $10 per square foot; 1-car garages run about $1,000 to $3,000 and 3-car garages about $3,000 to $8,000. Solid-color epoxy is about $3 to $6 per square foot, metallic about $6 to $12. Crack patching adds about $25 to $250, and a badly worn slab may need resurfacing at $3 to $7 per square foot. We quote each floor after seeing it; the cost guide explains what moves the number.

Usually, yes; an older slab just needs more prep. It is ground smooth and its cracks, holes and divots are filled first. If the top of the slab has started to flake, that layer is ground back and repaired, and if a crack is still moving, we tell you before coating it.

It helps, provided you rinse it. Road brine and salt ride home on your tires all winter. The National Ready Mixed Concrete Association advises hosing salt off garage slabs because de-icers speed up scaling on bare concrete. On a coated floor, slush sits on top where a squeegee or hose clears it. See our guide to Cincinnati’s climate and your epoxy floor for more.

Yes. Basement floors come up often in our Google reviews. Basement slabs can carry moisture, so we check the slab before recommending a system; a moisture-mitigation primer, if needed, typically adds about $1 to $3 per square foot. A coating won’t stop water coming in, but a sealed floor mops clean if water gets onto it.

It depends on the system. Of the three coatings, epoxy takes the longest to cure, and longer still on a cold slab, while a polyaspartic or polyurea top coat shortens the wait. Ask us for the walk-on and drive-on times for your floor before it’s booked.

Yes. Springdale, next to Sharonville in Hamilton County, is one of the 13 towns we cover, and the quote visit is free there too. Most Springdale homes went up between 1960 and 1989, so we check the slab for cracks and wear before we price the floor. Call (513) 434-8103, Monday to Friday, 9 AM to 6 PM.

Floor Studio · New

Try a Finish on a Sharonville Garage Before We Come Out

Pick a size, finish and color, then see a preview and a typical price range.

Open Floor Studio →

Get a Price on Your Sharonville Floor

The visit is free and carries no obligation. We look the slab over and quote it in person. Licensed and insured and serving Greater Cincinnati since 2019, we hand you a written warranty before any deposit; ask us for the warranty terms on the system you choose.

Call (513) 434-8103

5.0 on Google · 59 reviews (opens in a new tab) · Free on-site quote

Or leave your details below and we’ll call you to book a free look at your floor.

Form not showing? Call (513) 434-8103, Monday to Friday, 9 AM to 6 PM.

(513) 434-8103 Get a Free Quote